American Prime General Construction is a veteran-led roofing contractor and general contractor in Richardson, Texas. Roofing is our primary trade, and almost every significant fire loss becomes a roofing project: heat, attic flame spread and the ventilation holes firefighters cut usually mean the roof system has to be replaced rather than patched. We assess the roof and structure first, then plan the interior rebuild around that.
A fire loss requires specialized emergency services, smoke and soot remediation, demolition and environmental evaluation before reconstruction. APGC acts as the primary coordinator and facilitator that gets properly licensed fire and smoke remediation companies onsite, oversees their work, and then self-performs the complete build-back. That is what we mean by mitigation and remediation partner coordination: the licensed remediation company cleans and deodorizes, and APGC rebuilds.
Schedule a Free Roof Inspection Call 469-888-8326
Our Role After a Fire Loss
APGC evaluates the property from a construction perspective, develops the repair scope and plans the reconstruction. We do not perform fire, smoke, soot or environmental remediation, we do not clean smoke residues or deodorize contents, and we are not licensed or certified for that work. Those activities are performed by a qualified, authorized remediation provider under its own license.
Instead, we coordinate those specialists, keep their sequence aligned with the construction plan, and manage the transition into reconstruction. The standard governing the remediation partner’s work is the ANSI/IICRC S700 Standard for Professional Fire and Smoke Damage Restoration, which covers assessing fire residues and odors in a building, its systems such as HVAC, and its contents, and planning restoration cleaning and odor management. S700 expressly does not cover reconstruction. That is the line between the two companies on your project.
U.S. Fire Administration estimates for 2023 report 344,600 residential building fires and $11.27 billion in dollar loss, with dollar loss up 25 percent across 2014 to 2023 in constant dollars.
Fire Damage Extends Well Beyond the Burn Area
The burned room is rarely the whole loss. Three mechanisms spread damage:
- Smoke and soot. FEMA describes soot as the remains of incomplete combustion at roughly 0.1 micrometer in diameter, with ash the solid remains at 1 to 10 micrometers (FEMA homeowner’s guide to smoke damage remediation). Particles that small travel through cavities and ductwork far from the fire.
- Corrosive residues. The same guide notes that fire residue left on surfaces can permanently etch metal because of its extreme alkalinity or acidity, and that soot and ash damage porous materials such as upholstery and clothing.
- Suppression water. The U.S. Fire Administration notes that items untouched by fire may be ruined by smoke or soaked with the water used to put the fire out, and that soot and dirty water left behind can make you sick (USFA, After the Fire).
Because suppression water is part of nearly every fire loss, the drying and smoke scopes run together, both performed by licensed partners, as on our water damage reconstruction projects.
Why the Roof and Structure Need Engineering Assessment
Fire changes the capacity of the frame, and that must be answered before anyone rebuilds on top of it. Research from the USDA Forest Service’s Forest Products Laboratory on post-fire assessment of structural wood members notes that because the interior of a charred wood member normally retains its structural integrity, large members often do not need replacement, that engineering judgement is required to decide which members can remain, and that assessment should begin with the likely fire exposure and include visual inspection of members, connections and protective membranes.
On a roof that means evaluating rafters, trusses and decking, the connections and metal plates heat may have degraded, and the ventilation cuts made during the fire. Where members or sheathing are compromised, the assembly is rebuilt to current code: shingles must be fastened to solidly sheathed decks under the 2021 IRC (IRC Section R905.2.1), underlayment must comply with Section R905.1.1, and Section R905.2.8.5 requires a drip edge lapped not less than 2 inches with fastening at not more than 12 inches on center. Our roof inspection and forensic roof inspection documentation records those conditions, and roof replacement is scoped from them.
The Sequence From Board-Up to Completed Rebuild
USFA guidance is to stay out of the building until the fire department says it is safe, to let the fire department confirm whether water, electricity and gas are safe or have them disconnected, and in some cases to board up windows and doors. That sets the order of work:
| Phase | Who performs it |
|---|---|
| Release of the property and utility checks | Fire department and utility providers |
| Board-up, tarping and securing the structure | APGC, as construction work on the envelope |
| Residue and odor assessment, cleaning, deodorization, contents, HVAC | Licensed fire and smoke remediation partner, coordinated by APGC |
| Drying of water used in suppression | Licensed mitigation partner, coordinated by APGC |
| Structural assessment of framing, roof members and connections | Engineer or specialist, coordinated by APGC |
| Demolition, framing, roofing, trades, finishes and closeout | APGC, self-performed |
We do not begin reconstruction until the remediation partner has documented its results and released the affected areas, and until structural questions are answered in writing. FEMA notes that work such as replacing insulation may require a building permit, so confirm permit and inspection requirements with your city’s building department.
Fire-Damage Build-Back Services
Once the structure is released, the rebuild is ours, self-performed as one project:
- Structural repair and framing
- Roofing and decking
- Insulation replacement
- Drywall and texture
- Interior and exterior painting
- Flooring
- Cabinets and countertops
- Kitchen and bathroom reconstruction
- Window and door replacement
- Electrical, plumbing and HVAC trade coordination
- Exterior finishes and siding and windows
- Final finishes and closeout
What a full interior rebuild involves
A total interior rebuild is closer to new construction than to a repair. After demolition to the studs, the sequence is framing corrections, roof and envelope close-in, rough electrical, plumbing and HVAC, insulation, drywall, paint, flooring, cabinetry, trim, doors and fixtures, then closeout. Contents are handled by the remediation partner, not by us. Remodeling upgrades are often folded in while the walls are open, and our shingle guide covers the new roof.
Code-Triggered Upgrades on a Fire Rebuild
Rebuilding to the original condition is usually not permitted. Common triggers:
- Smoke alarms. Where alterations or repairs requiring a permit occur, the dwelling must have smoke alarms as required for new dwellings (IRC Section R314.2.2): in each sleeping room, outside each sleeping area, and on each additional story including basements and habitable attics, interconnected under Section R314.4 and powered from the building wiring with battery backup under Section R314.6.
- Egress. Where bedroom windows are rebuilt, emergency escape openings apply: net clear opening not less than 5.7 square feet, height not less than 24 inches, width not less than 20 inches, and 5 square feet at grade-floor openings (IRC Section R310.2.1).
- Insulation. Replacement insulation follows current R-value requirements, with the code’s allowances, such as the limited R-30 reduction for ceilings without attics (IRC Section N1102.2.2).
- Electrical and HVAC. Circuits, devices and equipment exposed to heat, smoke or suppression water are evaluated by licensed trades. FEMA advises leaving the air handler off until soot has been removed, then installing a new filter rated MERV 11 or higher, with professional duct and furnace cleaning.
Construction Documentation
We can prepare:
- Damage photographs and measurements
- Reconstruction scopes and construction estimates
- Material specifications and trade requirements
- Code and manufacturer documentation
- Repair sequencing explanations
- Documentation of hidden damage found during the project
We are not a public insurance adjuster and we do not negotiate claims on your behalf, and we do not promise any insurance outcome. The Texas Department of Insurance publishes guidance on documenting damage (TDI, my home was damaged). See our reconstruction and build-back services, roofing, remodeling, and construction documentation, or contact us.
Service Area
APGC serves Richardson and the Dallas-Fort Worth metroplex, including Plano, Dallas, Garland and Frisco. See all areas.
American Prime General Construction, 2100 N Greenville Ave Ste 106, Richardson, TX 75082. Phone (469) 888-8326. Veteran-led.
Frequently Asked Questions
Do you perform the fire and smoke remediation?
No. Specialized fire, smoke, soot and environmental remediation is performed by properly licensed providers, and APGC is not licensed or certified for that work. We act as the primary coordinator that gets those providers onsite, and self-perform the build-back after the affected areas are released.
When does reconstruction begin?
Reconstruction generally begins after emergency work, demolition, cleaning, remediation, testing and clearance have been completed or defined by the licensed partners, and after structural questions about the frame and roof are answered. Building over uncleaned residues or wet framing creates a second loss.
Can APGC rebuild the entire interior?
Yes. APGC can manage the complete reconstruction of affected interior and exterior areas, including structural, roofing, trade coordination, drywall, paint, flooring, cabinets, kitchens, bathrooms and finish work, in new-construction order from framing through rough trades, insulation, finishes and closeout.
Do you provide documentation for the insurance claim?
We provide construction estimates, photographs, measurements, scopes, material information and code documentation for the reconstruction work. We are not a public insurance adjuster and we do not negotiate claims on your behalf.
Does the roof always have to be replaced after a fire?
Not always, but it frequently does. Heat, attic flame spread and the ventilation holes cut during suppression commonly damage decking, underlayment and shingles beyond repair. The decision follows the structural assessment, and the rebuild must meet current code.
Who secures the house after the fire?
APGC can board up openings and tarp the roof, because that is construction work on the building envelope. USFA guidance is not to enter until the fire department says it is safe, and to let the fire department confirm or disconnect utilities.
Will the rebuild trigger code upgrades?
Usually. Smoke alarm requirements under IRC Section R314, emergency escape openings under Section R310, insulation R-values and current electrical requirements commonly apply even where the original construction predates them. Permit requirements vary by city, so confirm them with your local building department.
What about the smoke odor left in the structure?
Fire odor management is part of the licensed remediation partner’s scope under the IICRC S700 standard, not ours. We coordinate that partner, hold reconstruction until the affected areas are released, and then rebuild the finishes, insulation and assemblies that were removed.
A fire loss is a roofing project, a remediation project and a full rebuild at once. APGC leads with roofing, coordinates licensed fire, smoke and water partners, and self-performs the reconstruction. Review our storm restoration, wind damage and tornado reconstruction work, see how mitigation partner coordination fits in, ask about financing, or contact us to schedule an assessment.